RIP into MPLS Redistribution

Hi Fellas,

I want to share with you some little small hint for this MPLS topology

ip vrf asd

 rd 1:100

 route-target export 1:100

 route-target import 1:100

!

!

!router ospf 1

 log-adjacency-changes

 network 0.0.0.0 255.255.255.255 area 0

!

router rip

 version 2

 !

 address-family ipv4 vrf asd

  redistribute bgp 1 metric transparent

  network 10.0.0.0

  no auto-summary

  version 2

 exit-address-family

!

router bgp 1

 no synchronization

 bgp log-neighbor-changes

 neighbor 4.4.4.4 remote-as 1

 neighbor 4.4.4.4 update-source Loopback0

 no auto-summary

 !

 address-family vpnv4

  neighbor 4.4.4.4 activate

  neighbor 4.4.4.4 send-community both

 exit-address-family

 !

 address-family ipv4 vrf asd

  redistribute rip

  no synchronization

 exit-address-family

without "transparent" word when we try to redistribute rip over bgp , advertised prefixes are not adverties properly.

Cisco says:

Make sure that a metric, whether a specific metric or the keyword transparent, is configured when redistributing MP-BGP routes into RIP. If one is not specified, the routes may not be redistributed.

Regards !